Body › Interior parts › Repair
顶棚总成 · T00609897

 Ceiling assembly顶棚总成

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面,启用驻车制动,整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成
3. Remove the second row left seat back assembly3. 拆卸第二排左座椅靠背总成
4. Remove the second row right seat back assembly4. 拆卸第二排右座椅靠背总成
5. Remove the second row left backrest connection bracket5. 拆卸第二排左靠背连接支架
6. Remove the second row right backrest connection bracket6. 拆卸第二排右靠背连接支架
7. Remove the driver's side lower left decorative panel assembly7. 拆卸驾驶侧左下装饰板总成
8. Remove the driver's side lower cover panel assembly8. 拆卸驾驶侧下护板总成
9. Remove the left end cover assembly of the instrument panel9. 拆卸仪表板左侧端盖总成
10. Remove the left end cover of the instrument panel10. 拆卸仪表板左侧端盖盖板
11. Remove the left front inner sill trim panel assembly11. 拆卸左前内门槛饰板总成
12. Remove the left rear inner sill trim panel assembly12. 拆卸左后内门槛饰板总成
13. Remove the passenger side lower right decorative panel assembly13. 拆卸副驾驶侧右下装饰板总成
14. Remove the right end cover assembly of the instrument panel14. 拆卸仪表板右侧端盖总成
15. Remove the right end cover of the instrument panel15. 拆卸仪表板右侧端盖盖板
16. Remove the right front inner sill trim panel assembly16. 拆卸右前内门槛饰板总成
17. Remove the right rear inner sill trim panel assembly17. 拆卸右后内门槛饰板总成
18. Remove the hatchback door sill trim panel assembly18. 拆卸掀背门门槛饰板总成
19. Remove the left A-pillar upper trim panel assembly19. 拆卸左A柱上饰板总成
20. Remove the left B-pillar air outlet assembly20. 拆卸左侧B柱出风口总成
21. Remove the left B-pillar lower trim panel assembly21. 拆卸左B柱下饰板总成
22. Remove the left B-pillar upper trim panel assembly22. 拆卸左B柱上饰板总成
23. Remove the trunk light23. 拆卸行李箱灯
24. Remove the backup power socket (right C-pillar)24. 拆卸后备电源插座(右C柱)
25. Remove the left C-pillar lower trim panel assembly25. 拆卸左C柱下饰板总成
26. Remove the left C-pillar upper trim panel assembly26. 拆卸左C柱上饰板总成
27. Remove the right A-pillar upper trim panel assembly27. 拆卸右A柱上饰板总成
28. Remove the right B-pillar air outlet assembly28. 拆卸右侧B柱出风口总成
29. Remove the right B-pillar lower trim panel assembly29. 拆卸右B柱下饰板总成
30. Remove the right B-pillar upper trim panel assembly30. 拆卸右B柱上饰板总成
31. Remove the right C-pillar lower trim panel assembly31. 拆卸右C柱下饰板总成
32. Remove the upper trim panel assembly of the right C-pillar32. 拆卸右C柱上饰板总成
33. Remove the front dome light33. 拆卸前排顶灯
34. Remove the right rear dome light34. 拆卸右后排顶灯
35. Remove the left rear dome light35. 拆卸左后排顶灯
36. Disassembly of the left sun visor assembly36. 拆卸左遮阳板总成
37. Disassembly of the right sun visor assembly37. 拆卸右遮阳板总成
38. Remove sun visor hooks38. 拆卸遮阳板挂钩
39. Remove the left rear roof handle assembly39. 拆卸左后顶棚拉手总成
40. Remove the right rear ceiling handle assembly40. 拆卸右后顶棚拉手总成
41. Remove the ceiling handle assembly41. 拆卸顶棚拉手总成
42. Remove the ceiling assembly42. 拆卸顶棚总成
Graphic
1 Pry out the ceiling assembly.撬出顶棚总成。
Recommended tools: Interior parts removal tools推荐工具:内饰件拆卸工具
  Note:提示:
♦  Pay attention to the 3 fixing clips in the picture.注意图示3处固定卡扣。
  Caution:注意:
♦  When taking out the ceiling, avoid excessive bending, which may cause damage to the ceiling.取出顶棚时避免因过度弯折,导致顶棚损坏。
Installation procedure安装程序
1. Install the ceiling assembly1. 安装顶棚总成
Graphic
1 Place and adjust the ceiling assembly to the installation position, align the fixing clips in Figure 3 and press firmly to ensure that it is installed in place.放置并调整顶棚总成到安装位置,对准图3处固定卡子位置用力按压,确保安装到位。
2. Install the ceiling handle assembly2. 安装顶棚拉手总成
3. Install the right rear ceiling handle assembly3. 安装右后顶棚拉手总成
4. Install the left rear roof handle assembly4. 安装左后顶棚拉手总成
5. Install sun visor hooks5. 安装遮阳板挂钩
6. Install the right sun visor assembly6. 安装右遮阳板总成
7. Install the left sun visor assembly7. 安装左遮阳板总成
8. Install the right rear dome light8. 安装右后排顶灯
9. Install the left rear dome light9. 安装左后排顶灯
10. Install front dome lights10. 安装前排顶灯
11. Install the right C-pillar upper trim panel assembly11. 安装右C柱上饰板总成
12. Install the right C-pillar lower trim panel assembly12. 安装右C柱下饰板总成
13. Install the backup power socket (right C-pillar)13. 安装后备电源插座(右C柱)
14. Install the right B-pillar upper trim panel assembly14. 安装右B柱上饰板总成
15. Install the right B-pillar lower trim panel assembly15. 安装右B柱下饰板总成
16. Install the right B-pillar air outlet assembly16. 安装右侧B柱出风口总成
17. Install the right A-pillar upper trim panel assembly17. 安装右A柱上饰板总成
18. Install the left C-pillar upper trim panel assembly18. 安装左C柱上饰板总成
19. Install the left C-pillar lower trim panel assembly19. 安装左C柱下饰板总成
20. Install trunk light20. 安装行李箱灯
21. Install the left B-pillar upper trim panel assembly21. 安装左B柱上饰板总成
22. Install the left B-pillar lower trim panel assembly22. 安装左B柱下饰板总成
23. Install the left B-pillar air outlet assembly23. 安装左侧B柱出风口总成
24. Install the left A-pillar upper trim panel assembly24. 安装左A柱上饰板总成
25. Install hatchback door sill trim panel assembly25. 安装掀背门门槛饰板总成
26. Install the right rear inner sill trim panel assembly26. 安装右后内门槛饰板总成
27. Install the right front inner sill trim panel assembly27. 安装右前内门槛饰板总成
28. Install the right end cover of the instrument panel28. 安装仪表板右侧端盖盖板
29. Install the right end cover assembly of the instrument panel29. 安装仪表板右侧端盖总成
30. Install the passenger side lower right decorative panel assembly30. 安装副驾驶侧右下装饰板总成
31. Install the left rear inner sill trim panel assembly31. 安装左后内门槛饰板总成
32. Install the left front inner sill trim assembly32. 安装左前内门槛饰板总成
33. Install the left end cover plate of the instrument panel.33. 安装仪表板左侧端盖盖板
34. Install the left end cover assembly of the instrument panel.34. 安装仪表板左侧端盖总成
35. Install driver's side underbody protection assembly35. 安装驾驶侧下护板总成
36. Install the driver's side lower left trim panel assembly.36. 安装驾驶侧左下装饰板总成
37. Install the second row right backrest connecting bracket37. 安装第二排右靠背连接支架
38. Install the second row left backrest connecting bracket38. 安装第二排左靠背连接支架
39. Install the second-row right seat back assembly39. 安装第二排右座椅靠背总成
40. Install the second row left seat back assembly40. 安装第二排左座椅靠背总成
41. Install the second row seat cushion assembly41. 安装第二排座椅坐垫总成
42. Connect the negative terminal of the 12V battery42. 连接蓄电池负极