Second row seat cushion assembly第二排座椅坐垫总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成

1 Lift the front edge of the second-row seat cushion assembly A, disengage it from the two plastic clips B, and take out the second-row seat cushion assembly A with the wiring harness.掀起第二排座椅坐垫总成A前边缘，使其脱离2处塑料卡扣B，取出第二排座椅坐垫总成A带线束。   Note:提示： ♦  Adjust the left and right seat back assembly of the second row to facilitate the removal of the second row seat cushion assembly.调整第二排左、右座椅靠背总成，可便于拆卸第二排座椅坐垫总成。 2 Disconnect the connector of the second row seat cushion assembly and take out the second row seat cushion assembly.断开第二排座椅坐垫总成接插件，取出第二排座椅坐垫总成。

Installation procedure安装程序

1. Install the second row seat cushion assembly1. 安装第二排座椅坐垫总成 1 Connect the connector to the second row seat cushion assembly.连接接插件到第二排座椅坐垫总成。

2 Place and adjust the second-row seat cushion assembly A to the installation position, align the two plastic clips B and press the second-row seat cushion assembly A to install it in place.放置并调整第二排座椅坐垫总成A到安装位置，对准两处塑料卡扣B并按压第二排座椅坐垫总成A，使其安装到位。   Caution:注意： ♦  Check that the front and rear edges of the second row seat cushion assembly should be installed in place.检查第二排座椅坐垫总成前、后边缘应安装到位。

2. Connect the negative terminal of the 12V battery2. 连接蓄电池负极