Instrument panel left end cover仪表板左侧端盖盖板

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

4. Remove the left end cover assembly of the instrument panel4. 拆卸仪表板左侧端盖总成 Reference: Instrument panel left end cover assembly参考：仪表板左侧端盖总成

5. Remove the left end cover of the instrument panel5. 拆卸仪表板左侧端盖盖板

1 Remove the 2 fixing screws ① and pry out the left end cover of the instrument panel.拆卸2颗固定螺钉①，撬出仪表板左侧端盖盖板。 Recommended tools: Phillips screwdriver, interior parts removal tool推荐工具：十字螺丝刀、内饰件拆卸工具   Note:提示： ♦  Pay attention to the two claw positions in the picture.注意图示2处卡爪位置。

Installation procedure安装程序

1. Install the left end cover of the instrument panel1. 安装仪表板左侧端盖盖板

1 Place and adjust the left end cover of the instrument panel to the installation position, align the claw position and press hard to ensure that it is installed in place, install and tighten the 2 fixing screws ①.放置并调整仪表板左侧端盖盖板到安装位置，对准卡爪位置用力按压，确保安装到位，安装2颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the left end cover assembly of the instrument panel2. 安装仪表板左侧端盖总成 Reference: Instrument panel left end cover assembly参考：仪表板左侧端盖总成

3. Install the driver’s side lower cover panel assembly3. 安装驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

4. Install the driver's side lower left decorative panel assembly4. 安装驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

5. Connect the negative terminal of the 12V battery5. 连接蓄电池负极