Front dome light assembly前排顶灯总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the front dome light assembly2. 拆卸前排顶灯总成

1 Pry out the front dome light assembly A, disconnect the front dome light assembly connector, and remove the front dome light assembly.撬出前排顶灯总成A，断开前排顶灯总成接插件，取下前排顶灯总成。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具

Installation procedure安装程序

1. Install the front dome light assembly1. 安装前排顶灯总成

1 Connect the connector to the front dome light assembly, place and adjust the front dome light assembly A to the installation position, and press firmly to ensure that it is installed in place.连接接插件到前排顶灯总成，放置并调整前排顶灯总成A到安装位置，用力按压，确保安装到位。

2. Connect the negative terminal of the 12V battery, start the vehicle, and check that the front dome light assembly should work normally.2. 连接蓄电池负极，启动车辆，检前排顶灯总成应正常工作