Left rear inner sill trim panel assembly左后内门槛饰板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。

2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

3. Remove the left rear inner sill trim panel assembly3. 拆卸左后内门槛饰板总成

1 Remove the screw seat ① and pry out the left rear inner sill trim panel assembly A.拆卸螺钉座①，撬出左后内门槛饰板总成A。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具   Note:提示： ♦  Pay attention to the positions of 6 fixing claws, 3 fixing clips, and 1 bayonet in the picture.注意图示6处固定卡爪、3处固定卡扣、1处卡销位置。

Installation procedure安装程序

1. Install the left rear inner sill trim panel assembly1. 安装左后内门槛饰板总成

1 Place and adjust the left rear inner sill trim panel assembly to the installation position, align the 6 fixing claws, 3 fixing clips, and 1 bayonet position shown in the figure and press firmly to ensure that it is installed in place, and install the screw seat ①.放置并调整左后内门槛饰板总成到安装位置，对准图示6处固定卡爪、3处固定卡扣、1处卡销位置用力按压，确保安装到位，安装螺钉座①。

2. Install the second row seat cushion assembly2. 安装第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成