Second row right seat back assembly第二排右座椅靠背总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成
|
|
3. Remove the second row left seat back assembly3. 拆卸第二排左座椅靠背总成
|
|
4. Remove the second row right seat back assembly4. 拆卸第二排右座椅靠背总成
1 Disconnect the second row right seat back assembly and the second row back right lock bracket assembly.脱开第二排右座椅靠背总成与第二排靠背右锁扣支架总成的连接。
|
 |
2 Remove the fixing bolt ①.拆卸固定螺栓①。
|
 |
3 Remove the 2 fixing bolts ① and remove the second row right seat back assembly.拆卸2颗固定螺栓①，取下第二排右座椅靠背总成。
|
Installation procedure安装程序
|
1. Install the second row right seat back assembly1. 安装第二排右座椅靠背总成
|
|
|
1 Place and adjust the second row right seat back assembly to the installation position, install 2 fixing bolts ① and tighten.放置并调整第二排右座椅靠背总成到安装位置，安装2颗固定螺栓①并紧固。
|
|
|
2 Place and adjust the seat belt to the installation position, install the fixing bolt ① and tighten it.放置并调整安全带到安装位置，安装固定螺栓①并紧固。
3 Connect the second row right seat back assembly and the second row back right lock bracket assembly.连接第二排右座椅靠背总成与第二排靠背右锁扣支架总成。
|
|
2. Install the second row left seat back assembly2. 安装第二排左座椅靠背总成
|
|
3. Install the second row seat cushion assembly3. 安装第二排座椅坐垫总成
|
|
4. Connect the negative terminal of the 12V battery and check that the second row right seat back assembly can be folded and locked normally.4. 连接蓄电池负极，检查第二排右座椅靠背总成应能正常折叠、锁止
|