Backup power socket (right C-pillar)后备电源插座(右C柱)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the backup power socket2. 拆卸后备电源插座

1 Pry out the wiring harness of backup power socket A.撬出后备电源插座A带线束。 Recommended tools: clip remover推荐工具：卡扣起子

2 Disconnect connector A and remove the backup power socket.断开接插件A，取下后备电源插座。

Installation procedure安装程序

1. Install backup power outlet1. 安装后备电源插座

1 Connect connector A to the backup power outlet.连接接插件A到后备电源插座。

2 Place and adjust the backup power socket A to the installation position, press and fasten it.放置并调整后备电源插座A到安装位置，按压并扣紧。

2. Connect the negative terminal of the 12V battery, start the vehicle, and check that the backup power socket should be working normally.2. 连接蓄电池负极，启动车辆，检查后备电源插座应正常工作