In-car detection antenna (left front door)车内探测天线(左前门)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成 Reference: Left front door switch panel assembly参考：左前门开关面板总成

3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门) Reference: Midrange speaker assembly (left front door)参考：中音扬声器总成(左前门)

4. Remove the inner triangle plate assembly of the left front door4. 拆卸左前门内三角板总成 Reference: Left front door inner triangle assembly参考：左前门内三角板总成

5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成 Reference: Left front door trim panel assembly参考：左前门饰板总成

6. Remove the detection antenna in the car6. 拆卸车内探测天线

1 Remove the 2 fixing screws ① and remove the detection antenna in the car.拆卸2颗固定螺钉①，取下车内探测天线。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

Installation procedure安装程序

1. Install the in-car detection antenna1. 安装车内探测天线

1 Place and adjust the vehicle detection antenna to the installation position, install 2 fixing screws ① and tighten.放置并调整车内探测天线到安装位置，安装2颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the left front door trim panel assembly2. 安装左前门饰板总成 Reference: Left front door trim panel assembly参考：左前门饰板总成

3. Install the midrange speaker assembly (left front door)3. 安装中音扬声器总成(左前门) Reference: Midrange speaker assembly (left front door)参考：中音扬声器总成(左前门)

4. Install the left front door inner triangle panel assembly4. 安装左前门内三角板总成 Reference: Left front door inner triangle assembly参考：左前门内三角板总成

5. Install the left front door switch panel assembly5. 安装左前门开关面板总成 Reference: Left front door switch panel assembly参考：左前门开关面板总成

6. Connect the negative terminal of the 12V battery, start the vehicle, and check that the keyless entry system should work normally.6. 连接蓄电池负极，启动车辆，检查无钥匙进入系统应正常工作