Left front door switch panel assembly左前门开关面板总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成
|
 |
1 Pry out the left front door switch panel assembly A with the wiring harness.撬出左前门开关面板总成A带线束。
|
 |
2 Disconnect connector A and remove the left front door switch panel assembly.断开接插件A，取下左前门开关面板总成。
|
Installation procedure安装程序
|
1. Install the left front door switch panel assembly1. 安装左前门开关面板总成
|
|
|
1 Connect connector A to the left front door switch panel assembly.连接接插件A到左前门开关面板总成。
|
|
|
2 Place and adjust the left front door switch panel assembly A to the installation position, press firmly and tighten it.放置并调整左前门开关面板总成A到安装位置，用力按压并紧扣。
|
|
2. Connect the negative terminal of the 12V battery, start the vehicle, and check that the left front door accessory should work normally.2. 连接蓄电池负极，启动车辆，检查左前门附件应正常工作
|