Left front door inner triangular plate assembly左前门内三角板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the inner triangle plate assembly of the left front door2. 拆卸左前门内三角板总成

1 Pry out the inner triangle plate assembly A of the left front door.撬出左前门内三角板总成A。 Recommended tools: clip remover推荐工具：卡扣起子   Note:提示： ♦  Pay attention to the two clip positions in the picture.注意图示2处卡扣位置。

Installation procedure安装程序

1. Install the inner triangle plate assembly of the left front door1. 安装左前门内三角板总成

1 Place and adjust the inner triangle plate assembly A of the left front door to the installation position, align the two clip positions shown in the figure and press firmly to ensure that it is installed in place.放置并调整左前门内三角板总成A到安装位置，对准图示2处卡扣位置用力按压，确保安装到位。