Midrange speaker assembly (left front door)中音扬声器总成(左前门)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the midrange speaker assembly2. 拆卸中音扬声器总成

1 Pry open the bolt trim cover of the left front door handle box.撬开左前门拉手盒螺栓饰盖。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具   Note:提示： ♦  Pay attention to the position of the clip 18 in the picture.注意图示18处卡子位置。

2 Remove the 2 fixing screws ① and remove the midrange speaker assembly with wiring harness.拆卸2颗固定螺钉①，取下中音扬声器总成带线束。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

3 Disconnect connector A and remove midrange speaker assembly B.断开接插件A，取下中音扬声器总成B。

Installation procedure安装程序

1. Install midrange speaker assembly1. 安装中音扬声器总成

1 Connect connector A to midrange speaker assembly B.连接接插件A到中音扬声器总成B。

2 Place and adjust the midrange speaker assembly to the installation position, install 2 fixing screws ① and tighten them.放置并调整中音扬声器总成到安装位置，安装2颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

3 Place and adjust the left front door handle box bolt trim cover to the installation position. Align the position of the 18 clips in the picture and press firmly to ensure that the installation is in place.放置并调整左前门拉手盒螺栓饰盖到安装位置。对准图示18处卡子位置用力按压，确保安装到位。

2. Connect the negative terminal of the 12V battery, start the vehicle, and check that the midrange speaker assembly should work normally.2. 连接蓄电池负极，启动车辆，检查中音扬声器总成应正常工作