Mobile phone wireless charging module手机无线充电模块

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

4. Remove the passenger side lower right decorative panel assembly4. 拆卸副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

5. Remove the left front extension plate assembly5. 拆卸左前延伸板总成 Reference: Left front extension plate assembly参考：左前延伸板总成

6. Remove the right front extension plate assembly6. 拆卸右前延伸板总成 Reference: Right front extension plate assembly参考：右前延伸板总成

7. Remove the switch panel assembly7. 拆卸开关面板总成 Reference: Switch panel assembly参考：开关面板总成

8. Remove the sub-instrument panel body assembly8. 拆卸副仪表板本体总成 Reference: Sub-instrument panel body assembly参考：副仪表板本体总成

9. Remove the upper trim panel assembly on the sub-dashboard9. 拆卸副仪表板上饰板总成 Reference: Sub-instrument upper trim panel assembly参考：副仪表板上饰板总成

10. Disassemble the mobile phone wireless charging module10. 拆卸手机无线充电模块

1 Remove the 4 fixing screws ① and remove the mobile phone wireless charging module.拆卸4颗固定螺钉①，取下手机无线充电模块。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

Installation procedure安装程序

1. Install the mobile phone wireless charging module1. 安装手机无线充电模块

1 Place and adjust the mobile phone wireless charging module to the installation position, install 4 fixing screws ① and tighten.放置并调整手机无线充电模块到安装位置，安装4颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the upper trim panel assembly on the sub-dashboard2. 安装副仪表板上饰板总成 Reference: Sub-instrument upper trim panel assembly参考：副仪表板上饰板总成

3. Install the sub-instrument panel body assembly3. 安装副仪表板本体总成 Reference: Sub-instrument panel body assembly参考：副仪表板本体总成

4. Install the switch panel assembly4. 安装开关面板总成 Reference: Switch panel assembly参考：开关面板总成

5. Install the right front extension plate assembly5. 安装右前延伸板总成 Reference: Right front extension plate assembly参考：右前延伸板总成

6. Install the left front extension plate assembly6. 安装左前延伸板总成 Reference: Left front extension plate assembly参考：左前延伸板总成

7. Install the passenger side lower right decorative panel assembly7. 安装副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

8. Install the driver's side lower cover panel assembly8. 安装驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

9. Install the driver's side lower left decorative panel assembly9. 安装驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

10. Connect the negative terminal of the 12V battery, start the vehicle, and check that the mobile phone wireless charging module should work normally.10. 连接蓄电池负极，启动车辆，检查手机无线充电模块应正常工作