Left front door control module左前门控制模块
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成
|
|
3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门)
|
|
4. Remove the inner triangle plate assembly of the left front door4. 拆卸左前门内三角板总成
|
|
5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成
|
|
6. Remove the left front door control module6. 拆卸左前门控制模块
|
 |
1 Disconnect connectors A, B, and C, remove 2 fixing bolts ①, and remove the left front door control module.断开接插件A、B、C，拆卸2颗固定螺栓①，取下左前门控制模块。
|
Installation procedure安装程序
|
1. Install the left front door control module1. 安装左前门控制模块
|
|
|
1 Place and adjust the left front door control module to the installation position, install and tighten 2 fixing bolts ①, and connect connectors A, B, and C.放置并调整左前门控制模块到安装位置，安装2颗固定螺栓①并紧固，连接接插件A、B、C。
|
|
2. Install the left front door trim panel assembly2. 安装左前门饰板总成
|
|
3. Install the inner triangle plate assembly of the left front door3. 安装左前门内三角板总成
|
|
4. Install midrange speaker assembly (front left door)4. 安装中音扬声器总成(左前门)
|
|
5. Install the left front door switch panel assembly5. 安装左前门开关面板总成
|
|
6. Connect the negative terminal of the 12V battery, start the vehicle, and check that the left front door control module should work normally.6. 连接蓄电池负极，启动车辆，检查左前门控制模块应正常工作
|