Electrical › Audio entertainment system › Repair
重低音扬声器总成(左前门) · T00610896

 Subwoofer assembly (left front door)重低音扬声器总成(左前门)

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面,启用驻车制动,使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成
3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门)
4. Remove the inner triangle plate assembly of the left front door4. 拆卸左前门内三角板总成
5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成
6. Remove the subwoofer assembly (left front door)6. 拆卸重低音扬声器总成(左前门)
Graphic
1 Remove the 4 fixing screws ① and remove the subwoofer assembly A with the wiring harness.拆卸4颗固定螺钉①,取下重低音扬声器总成A带线束。
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀
Graphic
2 Disconnect connector A and remove subwoofer assembly B.断开接插件A,取下重低音扬声器总成B。
Installation procedure安装程序
1. Install the subwoofer assembly (left front door)1. 安装重低音扬声器总成(左前门)
Graphic
1 Connect connector A to subwoofer assembly B.连接接插件A到重低音扬声器总成B。
Graphic
2 Place and adjust subwoofer assembly A to the installation position, install 4 fixing screws ① and tighten.放置并调整重低音扬声器总成A到安装位置,安装4颗固定螺钉①并紧固。
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀
2. Install the left front door trim panel assembly2. 安装左前门饰板总成
3. Install the inner triangle plate assembly of the left front door3. 安装左前门内三角板总成
4. Install midrange speaker assembly (front left door)4. 安装中音扬声器总成(左前门)
5. Install the left front door switch panel assembly5. 安装左前门开关面板总成
6. Connect the negative terminal of the 12V battery, start the vehicle, and check that the subwoofer assembly should work normally.6. 连接蓄电池负极,启动车辆,检查重低音扬声器总成应正常工作