To radiator water pipe Ⅰ至散热器水管Ⅰ

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。 3 Lift the vehicle.举升车辆。

2. Remove the front compartment front lower cover panel assembly2. 拆卸机舱前下护板总成 Reference: Front compartment front lower cover panel assembly参考：机舱前下护板总成

3. Drain the coolant from the temperature control system3. 排放温控系统冷却液 Reference: Temperature control system coolant参考：温控系统冷却液

4. Remove the front compartment front upper cover panel assembly4. 拆卸机舱前上护板总成 Reference: Front compartment front upper cover panel assembly参考：机舱前上护板总成

5. Remove the left front wheel arch assembly5. 拆卸左前轮眉总成 Reference: Left front wheel arch trim assembly参考：左前轮眉总成

6. Remove the right front wheel arch assembly6. 拆卸右前轮眉总成 Reference: Right front wheel arch trim assembly参考：右前轮眉总成

7. Remove the front bumper assembly7. 拆卸前保险杠总成 Reference: Front bumper assembly参考：前保险杠总成

8. Disassemble to radiator water pipe Ⅰ8. 拆卸至散热器水管Ⅰ

1 Disconnect the connection to the radiator water pipe I joint A from the motor radiator and electronic fan assembly.断开至散热器水管Ⅰ接头A与电机散热器及电子风扇总成的连接。

2 Disconnect joint A from the radiator water pipe I and the thermal management integrated module, and remove it from the radiator water pipe I.断开至散热器水管Ⅰ接头A与热管理集成模块的连接，取下至散热器水管Ⅰ。

Installation procedure安装程序

1. Install to radiator water pipe Ⅰ1. 安装至散热器水管Ⅰ

1 Place and adjust the radiator water pipe I to the installation position, and connect the water pipe joint A to the thermal management integrated module.放置并调整至散热器水管Ⅰ到安装位置，连接水管接头A到热管理集成模块。

2 Connect to the radiator water pipe I connector A to the motor radiator and electronic fan assembly.连接至散热器水管Ⅰ接头A到电机散热器及电子风扇总成。

2. Install the front bumper assembly2. 安装前保险杠总成 Reference: Front bumper assembly参考：前保险杠总成

3. Install the left front wheel arch trim assembly3. 安装左前轮眉总成 Reference: Left front wheel arch trim assembly参考：左前轮眉总成

4. Install right front wheel arch assembly4. 安装右前轮眉总成 Reference: Right front wheel arch trim assembly参考：右前轮眉总成

5. Install the front compartment front upper cover panel assembly5. 安装机舱前上护板总成 Reference: Front compartment front upper cover panel assembly参考：机舱前上护板总成

6. Fill the temperature control system coolant6. 加注温控系统冷却液 Reference: Temperature control system coolant参考：温控系统冷却液

7. Install the front compartment front lower cover panel assembly7. 安装机舱前下护板总成 Reference: Front compartment front lower cover panel assembly参考：机舱前下护板总成

8. Land the vehicle, connect the negative terminal of the 12V battery, start the vehicle and drive away from the lift, check that the cooling system should be working normally8. 降落车辆，连接蓄电池负极，起动车辆并驶离举升机，检查冷却系统应正常工作