Left front wheel arch trim assembly左前轮眉总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left front wheel arch assembly2. 拆卸左前轮眉总成

1 Remove the 2 fixing screws ① and pry out the left front wheel arch assembly A.拆卸2颗固定螺钉①，撬出左前轮眉总成A。 Recommended tools: Phillips screwdriver, snap driver推荐工具：十字螺丝刀、卡扣起子   Note:提示： ♦  Pay attention to the 7 clip positions and 3 clip positions in the picture.注意图示7处卡扣位置，3处卡子位置。

Installation procedure安装程序

1. Install the left front wheel arch assembly1. 安装左前轮眉总成

1 Place and adjust the left front wheel fender assembly A to the installation position. Align the 7 clips and 3 claws in the picture and press hard to ensure that the installation is in place. Install the 2 fixing screws ① and tighten them.放置并调整左前轮眉总成A到安装位置，对准图示7处卡扣、3处卡爪位置用力按压，确保安装到位，安装2颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀