Front compartment front upper cover panel assembly机舱前上护板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the front compartment front upper cover panel assembly2. 拆卸机舱前上护板总成

1 Remove the two cotter pins ① and pry out the upper front cover panel assembly of the front compartment.拆卸2颗开尾销①，撬出机舱前上护板总成。 Recommended tools: clip remover推荐工具：卡扣起子   Note:提示： ♦  Pay attention to the 5 clip positions and 2 clip positions in the picture.注意图示5出卡子位置，2处卡扣位置。

Installation procedure安装程序

1. Install the front compartment front upper cover panel assembly1. 安装机舱前上护板总成

1 Place and adjust the front upper guard plate assembly of the front compartment to the installation position, align the clips and clips as shown in the figure and press firmly to ensure that the installation is in place, and install 2 cotter pins ①.放置并调整机舱前上护板总成到安装位置，对准图示卡子、卡扣位置用力按压，确保安装到位，安装2颗开尾销①。