Front compartment front lower cover panel assembly机舱前下护板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，整车电源处于“OFF”状态。 2 Lift the vehicle.举升车辆。

2. Remove the front compartment front lower cover panel assembly2. 拆卸机舱前下护板总成

1 Remove 10 fixing screws ①.拆卸10颗固定螺钉①。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2 Remove the 13 fixing bolts ① and remove the front lower guard plate assembly of the front compartment.拆卸13颗固定螺栓①，取下机舱前下护板总成。 Recommended tools: 10mm socket推荐工具：10mm套筒

Installation procedure安装程序

1. Install the front compartment front lower cover panel assembly1. 安装机舱前下护板总成

1 Place and adjust the front compartment front lower cover panel assembly to the installation position, install 13 fixing bolts ① and tighten them.放置并调整机舱前下护板总成到安装位置，安装13颗固定螺栓①并紧固。 Recommended tools: 10mm socket推荐工具：10mm套筒

2 Install 10 fixing screws ①.安装10颗固定螺钉①。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Land the vehicle, start the vehicle, and check that the front lower guard panel assembly of the front compartment is installed securely.2. 降落车辆，启动车辆，检查应机舱前下护板总成应安装牢固。