Door pressure sensor门压力传感器
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the inner triangle plate assembly of the left front door2. 拆卸左前门内三角板总成
|
|
3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门)
|
|
4. Remove the left front door switch panel assembly4. 拆卸左前门开关面板总成
|
|
5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成
|
|
6. Remove the door pressure sensor6. 拆卸门压力传感器
|
 |
1 Disconnect connector A, rotate and remove door pressure sensor B.断开接插件A，旋转并取下门压力传感器B。
|
Installation procedure安装程序
|
1. Install door pressure sensor1. 安装门压力传感器
|
|
|
1 Place and adjust door pressure sensor B to the installation position, and connect connector A to door pressure sensor B.放置并调整门压力传感器B到安装位置，连接接插件A到门压力传感器B。
|
|
2. Install the left front door trim panel assembly2. 安装左前门饰板总成
|
|
3. Install the left front door switch panel assembly3. 安装左前门开关面板总成
|
|
4. Install midrange speaker assembly (front left door)4. 安装中音扬声器总成(左前门)
|
|
5. Install the inner triangle plate assembly of the left front door5. 安装左前门内三角板总成
|
|
6. Connect the negative terminal of the 12V battery6. 连接蓄电池负极
|