Electrical › Central door locking system › Repair
左前门锁芯总成 · T00609817

 Left front door lock cylinder assembly左前门锁芯总成

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面,启用驻车制动,整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成
3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门)
4. Remove the inner triangle plate assembly of the left front door4. 拆卸左前门内三角板总成
5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成
6. Remove the left front door rear waterproof membrane6. 拆卸左前门后防水膜
7. Remove the left front door outer handle assembly7. 拆卸左前门外把手总成
8. Remove the left front door lock cylinder assembly8. 拆卸左前门锁芯总成
Graphic
1 Loosen the fixing screw ①, pry out and remove the left front door lock cylinder assembly A.松开固定螺钉①,撬出并取下左前门锁芯总成A。
Recommended tools: T30 socket推荐工具:T30套筒
Installation procedure安装程序
1. Install the left front door lock cylinder assembly1. 安装左前门锁芯总成
Graphic
1 Place and adjust the left front door lock cylinder assembly A to the installation position, and tighten the fixing screw ①.放置并调整左前门锁芯总成A到安装位置,紧固固定螺钉①。
Recommended tools: T30 socket推荐工具:T30套筒
2. Install the left front door outer handle assembly2. 安装左前门外把手总成
3. Install the left front door rear waterproof membrane3. 安装左前门后防水膜
4. Install the left front door trim panel assembly4. 安装左前门饰板总成
5. Install the inner triangle plate assembly of the left front door5. 安装左前门内三角板总成
6. Install the midrange speaker assembly (left front door)6. 安装中音扬声器总成(左前门)
7. Install the left front door switch panel assembly7. 安装左前门开关面板总成
8. Connect the negative terminal of the 12V battery and check that the left front door lock cylinder assembly should work normally.8. 连接蓄电池负极,检查左前门锁芯总成应正常工作