Left front door lock assembly左前门锁总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面,启用驻车制动,整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成
|
|
3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门)
|
|
4. Remove the inner triangle plate assembly of the left front door4. 拆卸左前门内三角板总成
|
|
5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成
|
|
6. Remove the left front door rear waterproof membrane6. 拆卸左前门后防水膜
|
|
7. Remove the left front door lock assembly7. 拆卸左前门锁总成
|
![]() |
1 Disconnect cable A and disengage all fixing clips.断开拉线A,脱开所有固定卡扣。
|
![]() |
2 Pry open the fixing clip B and disconnect the connecting rod A from the left front door lock cylinder assembly.撬开固定卡B,脱开连杆A与左前门锁芯总成的连接。
|
![]() |
3 Remove the 3 fixing screws ① and take out the left front door lock assembly A with the wiring harness.拆卸3颗固定螺钉①,取出左前门锁总成A带线束。
4 Disconnect the connector and remove the left front door lock assembly.断开接插件,取下左前门锁总成。
|
Installation procedure安装程序
|
1. Install the left front door lock assembly1. 安装左前门锁总成
1 Connect the connector to the left front door lock assembly.连接接插件到左前门锁总成。
|
![]() |
2 Place and adjust the left front door lock assembly A to the installation position, install 3 fixing screws ① and tighten.放置并调整左前门锁总成A到安装位置,安装3颗固定螺钉①并紧固。
|
![]() |
3 Install link A to the left front door lock cylinder and install fixing card B.安装连杆A到左前门锁芯,安装固定卡B。
|
![]() |
4 Install cable A and install all fixing clips.安装拉线A,安装所有固定卡扣。
|
|
2. Install the left front door rear waterproof membrane2. 安装左前门后防水膜
|
|
3. Install the left front door trim panel assembly3. 安装左前门饰板总成
|
|
4. Install the left front door inner triangle panel assembly4. 安装左前门内三角板总成
|
|
5. Install the midrange speaker assembly (left front door)5. 安装中音扬声器总成(左前门)
|
|
6. Install the left front door switch panel assembly6. 安装左前门开关面板总成
|
|
7. Connect the negative terminal of the 12V battery, start the vehicle, and check that the left front door lock assembly should work normally.7. 连接蓄电池负极,启动车辆,检查左前门锁总成应正常工作
|


