Rear wiper motor后刮水器电机

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Disassemble the rear scraper arm scraper assembly2. 拆卸后刮臂刮片总成 Reference: Rear scraper arm scraper assembly参考：后刮臂刮片总成

3. Remove the hatchback door handle box assembly3. 拆卸掀背门拉手盒总成 Reference: Hatchback door handle box assembly参考：掀背门拉手盒总成

4. Remove liftgate switch4. 拆卸举升门开关 Reference: Liftgate switch参考：举升门开关

5. Remove the hatchback door lower trim panel assembly5. 拆卸掀背门下饰板总成 Reference: Hatchback door lower trim panel assembly参考：掀背门下饰板总成

6. Remove the rear wiper motor6. 拆卸后刮水器电机

1 Disconnect connector A.断开接插件A。 2 Remove the 3 fixing bolts ① and remove the rear wiper motor.拆卸3颗固定螺栓①，取下后刮水器电机。 Recommended tools: 10mm socket推荐工具：10mm套筒

Installation procedure安装程序

1. Install the rear wiper motor motor1. 安装后雨刮电机电机

1 Place and adjust the rear wiper motor to the installation position, install 3 fixing bolts ① and tighten.放置并调整后刮水器电机到安装位置，安装3颗固定螺栓①紧固。 Recommended tools: 10mm socket推荐工具：10mm套筒 Torque requirement: 6-10N·m扭矩要求：6-10N•m 2 Connect connector A to the rear wiper motor.连接接插件A到后刮水器电机。

2. Install the hatchback door lower trim panel assembly2. 安装掀背门下饰板总成 Reference: Hatchback door lower trim panel assembly参考：掀背门下饰板总成

3. Install liftgate switch3. 安装举升门开关 Reference: Liftgate switch参考：举升门开关

4. Install the hatchback door handle box assembly4. 安装掀背门拉手盒总成 Reference: Hatchback door handle box assembly参考：掀背门拉手盒总成

5. Install the rear scraper arm scraper assembly5. 安装后刮臂刮片总成 Reference: Rear scraper arm scraper assembly参考：后刮臂刮片总成

6. Connect the negative terminal of the 12V battery, start the vehicle, and check that the liftgate wiper motor should work normally.6. 连接蓄电池负极，启动车辆，检查掀背门雨刮电机应正常工作