Liftgate switch举升门开关
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove liftgate switch2. 拆卸举升门开关
|
 |
1 Pry out liftgate switch A.撬出举升门开关A。
|
 |
2 Disconnect connector A and remove liftgate switch B.断开接插件A，取下举升门开关B。
|
Installation procedure安装程序
|
1. Install liftgate switch1. 安装举升门开关
|
|
|
1 Connect connector A to liftgate switch B.连接接插件A到举升门开关B。
|
|
|
2 Place and adjust liftgate switch A to the installation position.放置并调整举升门开关A到安装位置。
|
|
2. Connect the negative terminal of the 12V battery, start the vehicle, and check that the liftgate switch should work normally.2. 连接蓄电池负极，启动车辆，检查举升门开关应正常工作
|