Hatchback door handle box assembly掀背门拉手盒总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the hatchback door handle box assembly2. 拆卸掀背门拉手盒总成

1 Pry open the screw decorative cover, remove the fixing screw ①, and remove the hatchback door handle box assembly.撬开螺丝装饰盖板，拆卸固定螺钉①，取下掀背门拉手盒总成。 Recommended tools: Interior parts removal tools, Phillips screwdriver推荐工具：内饰件拆卸工具、十字螺丝刀

Installation procedure安装程序

1. Install the hatchback door handle box assembly1. 安装掀背门拉手盒总成

1 Place and adjust the hatchback door handle box assembly to the installation position, install the fixing screws ① and tighten them, and install the screw decorative cover.放置并调整掀背门拉手盒总成到安装位置，安装固定螺钉①并紧固，安装螺钉装饰盖板。 Recommended tools: Interior parts removal tools, Phillips screwdriver推荐工具：内饰件拆卸工具、十字螺丝刀

2. Start the vehicle and drive away from the maintenance station2. 启动车辆，驶离维修工位