Rear scraper arm scraper assembly后刮臂刮片总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Disassemble the rear scraper arm scraper assembly2. 拆卸后刮臂刮片总成

1 Remove the fixing nut ① and remove the rear scraper arm scraper assembly A.拆卸固定螺母①，取下后刮臂刮片总成A。 Recommended tools: 13mm socket推荐工具：13mm套筒

Installation procedure安装程序

1. Install the rear scraper arm scraper assembly1. 安装后刮臂刮片总成

1 Place and adjust the rear scraper arm scraper assembly A to the installation position, install the fixing nut ① and tighten it.放置并调整后刮臂刮片总成A到安装位置，安装固定螺母①并紧固。 Recommended tools: 13mm socket推荐工具：13mm套筒 Torque requirement: 8–12N·m扭矩要求：8–12N•m

2. Start the vehicle, check that the wiper system should be working normally, and drive away from the maintenance station.2. 启动车辆，检查雨刮系统应正常工作，驶离维修工位