Electrical › Car windows/glass/rearview mirrors › Repair
左外视镜总成 · T00609799

 Left exterior mirror assembly左外视镜总成

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面,启用驻车制动,整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
2. Remove the left front door switch panel assembly2. 拆卸左前门开关面板总成
3. Remove the midrange speaker assembly (left front door)3. 拆卸中音扬声器总成(左前门)
4. Remove the inner triangle plate assembly of the left front door4. 拆卸左前门内三角板总成
5. Remove the left front door trim panel assembly5. 拆卸左前门饰板总成
6. Remove the waterproof membrane on the left front door6. 拆卸左前门前防水膜
7. Remove the left exterior mirror assembly7. 拆卸左外视镜总成
1 Disconnect the left exterior mirror assembly connector.断开左外视镜总成接插件。
Graphic
2 Pry open the bolt cover, remove the 3 fixing bolts ①, and remove the left exterior mirror assembly.撬开螺栓堵盖,拆卸3颗固定螺栓①,取下左外视镜总成。
Recommended tools: 10mm socket推荐工具:10mm套筒
  Caution:注意:
♦  Lift the left exterior mirror assembly to prevent it from falling suddenly after disassembly.托举左外视镜总成,避免拆卸后突然掉落。
  Note:提示:
♦  Remove carefully to avoid the fixing bolt falling into the left front door.小心拆卸,避免固定螺栓落入左前车门内。
Installation procedure安装程序
1. Install the left exterior mirror assembly1. 安装左外视镜总成
Graphic
1 Place and adjust the left exterior mirror assembly to the installation position, install and tighten the 3 fixing bolts ①, and install the bolt cover.放置并调整左外视镜总成到安装位置,安装3颗固定螺栓①并紧固,安装螺栓堵盖。
Recommended tools: 10mm socket推荐工具:10mm套筒
Torque requirement: 6-10N·m扭矩要求:6-10N•m
2 Connect the left exterior mirror assembly connector.连接左外视镜总成接插件。
2. Install the waterproof membrane on the left front door2. 安装左前门前防水膜
3. Install the left front door trim panel assembly3. 安装左前门饰板总成
4. Install the left front door inner triangle panel assembly4. 安装左前门内三角板总成
5. Install the midrange speaker assembly (left front door)5. 安装中音扬声器总成(左前门)
6. Install the left front door switch panel assembly6. 安装左前门开关面板总成
7. Connect the negative terminal of the 12V battery, start the vehicle, and check that the electric adjustment function of the exterior rearview mirror should work normally.7. 连接蓄电池负极,启动车辆,检查外后视镜电动调节功能应正常工作