Rear bumper lower left mounting bracket assembly后保险杠左下安装支架总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，使整车电源处于“OFF”状态。
2 Lift the vehicle.举升车辆。
|
|
2. Remove the left rear wheel assembly2. 拆卸左后车轮总成
|
|
3. Remove the left rear wheel fender rear section assembly3. 拆卸左后轮眉后段总成
|
|
4. Remove the left rear wheel fender assembly4. 拆卸左后轮挡泥板总成
|
|
5. Remove the rear bumper lower left mounting bracket assembly5. 拆卸后保险杠左下安装支架总成
|
 |
1 Remove the 2 fixing bolts ① and remove the lower left mounting bracket assembly of the rear bumper.拆卸2颗固定螺栓①，取下后保险杠左下安装支架总成。
|
Installation procedure安装程序
|
1. Install the lower left mounting bracket assembly of the rear bumper1. 安装后保险杠左下安装支架总成
|
|
|
1 Place and adjust the lower left mounting bracket assembly of the rear bumper to the installation position, install 2 fixing bolts ① and tighten them.放置并调整后保险杠左下安装支架总成到安装位置，安装2颗固定螺栓①并紧固。
|
|
2. Install the left rear wheel fender assembly2. 安装左后轮挡泥板总成
|
|
3. Install the left rear wheel fender rear section assembly3. 安装左后轮眉后段总成
|
|
4. Install the left rear wheel assembly4. 安装左后车轮总成
|
|
5. Land the vehicle, start the vehicle and drive away from the lift5. 降落车辆，起动车辆并驶离举升机
|