Body › Exterior trim parts › Repair
左后轮挡泥板总成 · T00617351

 Left rear wheel fender assembly左后轮挡泥板总成

Removal procedure拆卸程序
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置,启用驻车制动,使整车电源处于“OFF”状态。
2 Lift the vehicle.举升车辆。
2. Remove the left rear wheel assembly2. 拆卸左后车轮总成
3. Remove the left rear wheel fender rear section assembly3. 拆卸左后轮眉后段总成
4. Remove the left rear wheel fender assembly4. 拆卸左后轮挡泥板总成
Graphic
1 Remove 3 cotter pins ①, 1 fixing screw seat ②, and 1 fixing screw ③.拆卸3颗开尾销①、1颗固定螺钉座②、1颗固定螺钉③。
Recommended tools: snap driver ①, 10mm socket ②, Phillips screwdriver ③推荐工具:卡扣起子①、10mm套筒②、十字螺丝刀③
Graphic
2 Remove 2 fixing screws ① and 1 fixing bolt ②.拆卸2颗固定螺钉①,1颗固定螺栓②。
Recommended tools: Phillips screwdriver ①, 10mm socket ②推荐工具:十字螺丝刀①、10mm套筒②
Graphic
3 Remove 2 fixing screws ①, 4 fixing screw seats ②, and remove the left rear wheel fender assembly.拆卸2颗固定螺钉①,4颗固定螺钉座②,取下左后轮挡泥板总成。
Recommended tools: Phillips screwdriver ①, 10mm socket ②推荐工具:十字螺丝刀①、10mm套筒②
Installation procedure安装程序
1. Install the left rear wheel fender assembly1. 安装左后轮挡泥板总成
Graphic
1 Place and adjust the left rear wheel fender assembly to the installation position, install 2 fixing screws ① and 4 fixing screw seats ② and tighten them.放置并调整左后轮挡泥板总成到安装位置,安装2颗固定螺钉①,4颗固定螺钉座②并紧固。
Recommended tools: Phillips screwdriver ①, 10mm socket ②推荐工具:十字螺丝刀①、10mm套筒②
Graphic
2 Install 2 fixing screws ① and 1 fixing bolt ② and tighten them.安装2颗固定螺钉①,1颗固定螺栓②并紧固。
Recommended tools: Phillips screwdriver ①, 10mm socket ②推荐工具:十字螺丝刀①、10mm套筒②
Graphic
3 Install 3 cotter pins ①, 1 fixing screw seat ②, and 1 fixing screw ③ and tighten them.安装3颗开尾销①、1颗固定螺钉座②、1颗固定螺钉③并紧固。
Recommended tools: snap driver ①, 10mm socket ②, Phillips screwdriver ③推荐工具:卡扣起子①、10mm套筒②、十字螺丝刀③
2. Install the left rear wheel fender rear section assembly2. 安装左后轮眉后段总成
3. Install the left rear wheel assembly3. 安装左后车轮总成
4. Land the vehicle, start the vehicle and drive away from the lift4. 降落车辆,起动车辆并驶离举升机