Left rear wheel arch trim rear section assembly左后轮眉后段总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。

2. Remove the left rear wheel fender rear section assembly2. 拆卸左后轮眉后段总成

1 Pry out the left rear wheel fender rear section assembly A.撬出左后轮眉后段总成A。   Note:提示： ♦  Pay attention to the 4 clip positions, 3 claw positions, and 4 guide pin positions shown in the figure.注意图示4处卡扣位置、3处卡爪位置、4处导销位置。

Installation procedure安装程序

1. Install the left rear wheel fender rear section assembly1. 安装左后轮眉后段总成

1 Place and adjust the left rear wheel fender rear section assembly A to the installation position. Align the 4 clip positions, 3 clip positions, and 4 guide pin positions shown in the figure and press firmly to ensure that the installation is in place.放置并调整左后轮眉后段总成A到安装位置，对准图示4处卡扣位置、3处卡子位置、4处导销位置用力按压确保安装到位。