In-car detection antenna (secondary instrument panel)车内探测天线(副仪表板)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

4. Remove the passenger side lower right decorative panel assembly4. 拆卸副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

5. Remove the left front extension plate assembly5. 拆卸左前延伸板总成 Reference: Left front extension plate assembly参考：左前延伸板总成

6. Remove the right front extension plate assembly6. 拆卸右前延伸板总成 Reference: Right front extension plate assembly参考：右前延伸板总成

7. Remove the switch panel assembly7. 拆卸开关面板总成 Reference: Switch panel assembly参考：开关面板总成

8. Remove the sub-instrument panel body assembly8. 拆卸副仪表板本体总成 Reference: Sub-instrument panel body assembly参考：副仪表板本体总成

9. Remove the interior detection antenna (sub-instrument panel)9. 拆卸车内探测天线(副仪表板)

1 Lay the sub-instrument panel body assembly to the side, remove the 2 fixing screws ①, and remove the vehicle detection antenna.向侧面放倒副仪表板本体总成，拆卸2颗固定螺钉①，取下车内探测天线。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

Installation procedure安装程序

1. Install the interior detection antenna (sub-instrument panel)1. 安装车内探测天线(副仪表板)

1 Place and adjust the vehicle detection antenna to the installation position, install 2 fixing screws ① and tighten.放置并调整车内探测天线到安装位置，安装2颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the sub-instrument panel body assembly2. 安装副仪表板本体总成 Reference: Sub-instrument panel body assembly参考：副仪表板本体总成

3. Install the switch panel assembly3. 安装开关面板总成 Reference: Switch panel assembly参考：开关面板总成

4. Install right front extension panel assembly4. 安装右前延伸板总成 Reference: Right front extension plate assembly参考：右前延伸板总成

5. Install the left front extension plate assembly5. 安装左前延伸板总成 Reference: Left front extension plate assembly参考：左前延伸板总成

6. Install the passenger side lower right decorative panel assembly6. 安装副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

7. Install the driver’s side lower cover panel assembly7. 安装驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

8. Install the driver's side lower left decorative panel assembly8. 安装驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

9. Connect the negative terminal of the 12V battery9. 连接蓄电池负极