CCB body connection left bracket assemblyCCB车身连接左支架总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

4. Remove the passenger side lower right decorative panel assembly4. 拆卸副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

5. Remove the left front extension plate assembly5. 拆卸左前延伸板总成 Reference: Left front extension plate assembly参考：左前延伸板总成

6. Remove the right front extension plate assembly6. 拆卸右前延伸板总成 Reference: Right front extension plate assembly参考：右前延伸板总成

7. Remove the switch panel assembly7. 拆卸开关面板总成 Reference: Switch panel assembly参考：开关面板总成

8. Remove the sub-instrument panel body assembly8. 拆卸副仪表板本体总成 Reference: Sub-instrument panel body assembly参考：副仪表板本体总成

9. Remove the CCB body connection left bracket assembly9. 拆卸CCB车身连接左支架总成

1 Remove 2 fixing nuts ① and 2 fixing bolts ②, and remove the CCB body connection left bracket assembly.拆卸2颗固定螺母①、2颗固定螺栓②，取下CCB车身连接左支架总成。 Recommended tools: 13mm socket推荐工具：13mm套筒

Installation procedure安装程序

1. Install the CCB body connection left bracket assembly1. 安装CCB车身连接左支架总成

1 Place and adjust the CCB body connection left bracket assembly to the installation position, install 2 fixing nuts ① and 2 fixing bolts ② and tighten them.放置并调整CCB车身连接左支架总成到安装位置，安装2颗固定螺母①、2颗固定螺栓②并紧固。 Recommended tools: 13mm socket推荐工具：13mm套筒 Torque requirement: 27-33N·m扭矩要求：27-33N•m

2. Install the sub-instrument panel body assembly2. 安装副仪表板本体总成 Reference: Sub-instrument panel body assembly参考：副仪表板本体总成

3. Install the switch panel assembly3. 安装开关面板总成 Reference: Switch panel assembly参考：开关面板总成

4. Install right front extension panel assembly4. 安装右前延伸板总成 Reference: Right front extension plate assembly参考：右前延伸板总成

5. Install the left front extension plate assembly5. 安装左前延伸板总成 Reference: Left front extension plate assembly参考：左前延伸板总成

6. Install the passenger side lower right decorative panel assembly6. 安装副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

7. Install the driver’s side lower cover panel assembly7. 安装驾驶侧下护板总成 Reference: Driver's side lower cover panel assembly参考：驾驶侧下护板总成

8. Install the driver's side lower left decorative panel assembly8. 安装驾驶侧左下装饰板总成 Reference: Driver's side lower left decorative panel assembly参考：驾驶侧左下装饰板总成

9. Connect the negative terminal of the 12V battery9. 连接蓄电池负极