Secondary instrument rear mounting bracket assembly副仪表后安装支架总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成
|
|
3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成
|
|
4. Remove the passenger side lower right decorative panel assembly4. 拆卸副驾驶侧右下装饰板总成
|
|
5. Remove the left front extension plate assembly5. 拆卸左前延伸板总成
|
|
6. Remove the right front extension plate assembly6. 拆卸右前延伸板总成
|
|
7. Remove the switch panel assembly7. 拆卸开关面板总成
|
|
8. Remove the sub-instrument panel body assembly8. 拆卸副仪表板本体总成
|
|
9. Remove the sub-instrument and install the bracket assembly9. 拆卸副仪表后安装支架总成
|
 |
1 Remove the 2 fixing nuts ①, remove the sub-instrument and install the bracket assembly.拆卸2颗固定螺母①，取下副仪表后安装支架总成。
|
Installation procedure安装程序
|
1. Install the bracket assembly after installing the sub-instrument1. 安装副仪表后安装支架总成
|
|
|
1 After placing and adjusting the sub-instrument, install the bracket assembly to the installation position, install 2 fixing nuts ① and tighten them.放置并调整副仪表后安装支架总成到安装位置，安装2颗固定螺母①并紧固。
|
|
2. Install the sub-instrument panel body assembly2. 安装副仪表板本体总成
|
|
3. Install the switch panel assembly3. 安装开关面板总成
|
|
4. Install right front extension panel assembly4. 安装右前延伸板总成
|
|
5. Install the left front extension plate assembly5. 安装左前延伸板总成
|
|
6. Install the passenger side lower right decorative panel assembly6. 安装副驾驶侧右下装饰板总成
|
|
7. Install the driver’s side lower cover panel assembly7. 安装驾驶侧下护板总成
|
|
8. Install the driver's side lower left decorative panel assembly8. 安装驾驶侧左下装饰板总成
|
|
9. Connect the negative terminal of the 12V battery9. 连接蓄电池负极
|