Trunk opening switch行李箱开启开关
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove liftgate switch2. 拆卸举升门开关
|
|
3. Remove the hatchback door handle box assembly3. 拆卸掀背门拉手盒总成
|
|
4. Remove the hatchback door lower trim panel assembly4. 拆卸掀背门下饰板总成
|
|
5. Remove the trunk opening switch5. 拆卸行李箱开启开关
|
 |
1 Disconnect connector A.断开接插件A。
|
 |
2 Pry out the trunk opening switch A.撬出行李箱开启开关A。
|
Installation procedure安装程序
|
1. Install the trunk opening switch1. 安装行李箱开启开关
|
|
|
1 Place and adjust the trunk opening switch A to the installation position, align the two claw positions and press firmly to ensure that the installation is in place.放置并调整行李箱开启开关A到安装位置，对准2处卡爪位置用力按压，确保安装到位。
|
|
|
2 Connect connector A.连接接插件A。
|
|
2. Install the hatchback door lower trim panel assembly2. 安装掀背门下饰板总成
|
|
3. Install the hatchback door handle box assembly3. 安装掀背门拉手盒总成
|
|
4. Install liftgate switch4. 安装举升门开关
|
|
5. Connect the negative terminal of the 12V battery, start the vehicle, and check that the trunk opening switch should work normally.5. 连接蓄电池负极，启动车辆，检查行李箱开启开关应正常工作
|