Subwoofer assembly (low speed beep)低音扬声器总成(低速提示音)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。 3 Lift the vehicle.举升车辆。

2. Remove the upper front guard panel of the front compartment2. 拆卸机舱前上护板 Reference: Front compartment front upper cover panel assembly参考：机舱前上护板总成

3. Remove the left front wheel arch assembly3. 拆卸左前轮眉总成 Reference: Left front wheel arch trim assembly参考：左前轮眉总成

4. Remove the right front wheel arch assembly4. 拆卸右前轮眉总成 Reference: Right front wheel arch trim assembly参考：右前轮眉总成

5. Remove the front bumper assembly5. 拆卸前保险杠总成 Reference: Front bumper assembly参考：前保险杠总成

6. Remove the woofer assembly6. 拆卸低音扬声器总成

1 Disconnect connector A, remove 2 fixing nuts ①, and remove the woofer assembly.断开接插件A，拆卸2颗固定螺母①，取下低音扬声器总成。 Recommended tools: 10mm socket推荐工具：10mm套筒

Installation procedure安装程序

1. Install the woofer assembly1. 安装低音扬声器总成

1 Place and adjust the woofer assembly to the installation position, install and tighten 2 fixing nuts ①, and connect connector A.放置并调整低音扬声器总成到安装位置，安装2颗固定螺母①并紧固，连接接插件A。 Recommended tools: 10mm socket推荐工具：10mm套筒

2. Install the front bumper assembly2. 安装前保险杠总成 Reference: Front bumper assembly参考：前保险杠总成

3. Install the left front wheel arch trim assembly3. 安装左前轮眉总成 Reference: Left front wheel arch trim assembly参考：左前轮眉总成

4. Install right front wheel arch assembly4. 安装右前轮眉总成 Reference: Right front wheel arch trim assembly参考：右前轮眉总成

5. Install the front upper guard panel of the front compartment5. 安装机舱前上护板 Reference: Front compartment front upper cover panel assembly参考：机舱前上护板总成

6. Land the vehicle, connect the negative terminal of the 12V battery, start the vehicle and drive away from the lift, conduct a road test and check6. 降落车辆，连接蓄电池负极，起动车辆并驶离举升机，路试检查