Hatchback door lock assembly掀背门锁总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the hatchback door handle box assembly2. 拆卸掀背门拉手盒总成 Reference: Hatchback door handle box assembly参考：掀背门拉手盒总成

3. Remove liftgate switch3. 拆卸举升门开关 Reference: Liftgate switch参考：举升门开关

4. Remove the hatchback door lower trim panel assembly4. 拆卸掀背门下饰板总成 Reference: Hatchback door lower trim panel assembly参考：掀背门下饰板总成

5. Remove the hatchback door lock assembly5. 拆卸掀背门锁总成

1 Remove the 3 fixing bolts ① and remove the hatchback door lock assembly with wiring harness.拆卸3颗固定螺栓①，取下掀背门锁总成带线束。 Recommended tools: T40 socket推荐工具：T40套筒

2 Disconnect connector A and remove the hatchback door lock assembly.断开接插件A，取下掀背门锁总成。

Installation procedure安装程序

1. Install hatchback door lock assembly1. 安装掀背门锁总成

1 Connect connector A to the hatchback door lock assembly.连接接插件A到掀背门锁总成。

2 Place and adjust the hatchback door lock assembly to the installation position, install 2 fixing bolts ① and tighten them.放置并调整掀背门锁总成到安装位置，安装2颗固定螺栓①并紧固。 Recommended tools: T40 socket推荐工具：T40套筒 Torque requirement: 7-9N·m扭矩要求：7-9N•m

2. Install the hatchback door lower trim panel assembly2. 安装掀背门下饰板总成 Reference: Hatchback door lower trim panel assembly参考：掀背门下饰板总成

3. Install the hatchback door handle box assembly3. 安装掀背门拉手盒总成 Reference: Hatchback door handle box assembly参考：掀背门拉手盒总成

4. Install liftgate switch4. 安装举升门开关 Reference: Liftgate switch参考：举升门开关

5. Connect the negative terminal of the 12V battery, start the vehicle, and check that the hatchback door unlocking lock should work normally.5. 连接蓄电池负极，启动车辆，检查掀背门解闭锁应正常工作