Air outlet assembly on the left side of the instrument panel仪表板左侧出风口总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成
|
|
3. Remove the driver’s side lower cover panel assembly3. 拆卸驾驶侧下护板总成
|
|
4. Remove the left end cover assembly of the instrument panel4. 拆卸仪表板左侧端盖总成
|
|
5. Remove the steering column upper guard assembly5. 拆卸转向管柱上护罩总成
|
|
6. Remove the combined instrument screen6. 拆卸组合仪表屏
|
|
7. Remove the air outlet assembly on the left side of the instrument panel7. 拆卸仪表板左侧出风口总成
|
 |
1 Remove the 2 fixing screws ① and pry out the air outlet assembly on the left side of the instrument panel.拆卸2颗固定螺钉①，撬出仪表板左侧出风口总成。
|
Installation procedure安装程序
|
1. Install the air outlet assembly on the left side of the instrument panel1. 安装仪表板左侧出风口总成
|
|
|
1 Place and adjust the air outlet assembly on the left side of the dashboard to the installation position, install 2 fixing screws ① and tighten them.放置并调整仪表板左侧出风口总成到安装位置，安装2颗固定螺钉①并紧固。
|
|
2. Install the instrument cluster screen2. 安装组合仪表屏
|
|
3. Install the steering column upper guard assembly3. 安装转向管柱上护罩总成
|
|
4. Install the left end cover assembly of the instrument panel.4. 安装仪表板左侧端盖总成
|
|
5. Install the driver’s side lower cover panel assembly5. 安装驾驶侧下护板总成
|
|
6. Install the driver's side lower left decorative panel assembly6. 安装驾驶侧左下装饰板总成
|
|
7. Connect the negative terminal of the 12V battery7. 连接蓄电池负极
|