Combined instrument screen组合仪表屏
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the steering column upper guard assembly2. 拆卸转向管柱上护罩总成
|
|
3. Remove the combined instrument screen3. 拆卸组合仪表屏
|
 |
1 Remove the 2 fixing screws ① and take out the instrument panel harness.拆卸2颗固定螺钉①，取出组合仪表屏带线束。
|
 |
2 Disconnect connectors A and B, and remove the combined instrument panel assembly.断开接插件A、B，取下组合仪表屏总成。
|
Installation procedure安装程序
|
1. Install the instrument cluster screen1. 安装组合仪表屏
|
|
|
1 Connect connectors A and B to the instrument cluster screen.连接接插件A、B到组合仪表屏。
|
|
|
2 Place and adjust the combined instrument panel to the installation position, install 2 fixing screws ① and tighten them.放置并调整组合仪表屏到安装位置，安装2颗固定螺钉①并紧固。
|
|
2. Install the steering column upper guard assembly2. 安装转向管柱上护罩总成
|
|
3. Connect the negative terminal of the 12V battery, start the vehicle, and check that the instrument cluster is working properly.3. 连接蓄电池负极，启动车辆，检查组合仪表应正常工作
|