Center panel assembly中央面板总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the steering column upper guard assembly2. 拆卸转向管柱上护罩总成 Reference: Steering column upper guard assembly参考：转向管柱上护罩总成

3. Remove the combined instrument screen3. 拆卸组合仪表屏 Reference: Instrument cluster screen参考：组合仪表屏

4. Remove the touch control screen4. 拆卸触摸控制屏 Reference: Touch control screen参考：触摸控制屏

5. Remove the passenger side lower right decorative panel assembly5. 拆卸副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

6. Remove the right center decorative panel assembly on the passenger side6. 拆卸副驾驶侧右中装饰板总成 Reference: Passenger side right center decorative panel assembly参考：副驾驶侧右中装饰板总成

7. Remove the right end cover assembly of the instrument panel7. 拆卸仪表板右侧端盖总成 Reference: Instrument panel right end cover assembly参考：仪表板右侧端盖总成

8. Remove the air outlet assembly on the right side of the instrument panel8. 拆卸仪表板右侧出风口总成 Reference: Air outlet assembly on the right side of the instrument panel参考：仪表板右侧出风口总成

9. Remove the center panel assembly9. 拆卸中央面板总成

1 Remove the fixing screw ①.拆卸固定螺钉①。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2 Pry out the center panel assembly A.撬出中央面板总成A。 Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具   Note:提示： ♦  Pay attention to the claw position at point 15 in the picture.注意图示15处卡爪位置。

Installation procedure安装程序

1. Install the center panel assembly1. 安装中央面板总成

1 Place and adjust the center panel assembly A to the installation position, align the claws at position 15 in the figure, and press firmly to ensure that it is installed in place.放置并调整中央面板总成A到安装位置，对准图示15处卡爪位置用力按压，确保安装到位。

2 Install the fixing screw ① and tighten.安装固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the air outlet assembly on the right side of the instrument panel2. 安装仪表板右侧出风口总成 Reference: Air outlet assembly on the right side of the instrument panel参考：仪表板右侧出风口总成

3. Install the right end cover assembly of the instrument panel3. 安装仪表板右侧端盖总成 Reference: Instrument panel right end cover assembly参考：仪表板右侧端盖总成

4. Install the right center decorative panel assembly on the passenger side4. 安装副驾驶侧右中装饰板总成 Reference: Passenger side right center decorative panel assembly参考：副驾驶侧右中装饰板总成

5. Install the passenger side lower right decorative panel assembly5. 安装副驾驶侧右下装饰板总成 Reference: Passenger side lower right decorative panel assembly参考：副驾驶侧右下装饰板总成

6. Install the touch control screen6. 安装触摸控制屏 Reference: Touch control screen参考：触摸控制屏

7. Install the instrument cluster screen7. 安装组合仪表屏 Reference: Instrument cluster screen参考：组合仪表屏

8. Install the steering column upper guard assembly8. 安装转向管柱上护罩总成 Reference: Steering column upper guard assembly参考：转向管柱上护罩总成

9. Connect the negative terminal of the 12V battery9. 连接蓄电池负极