Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
|
|
|
2. Remove the passenger side lower right decorative panel assembly2. 拆卸副驾驶侧右下装饰板总成
|
|
|
3. Remove the right end cover assembly of the instrument panel3. 拆卸仪表板右侧端盖总成
|
|
|
4. Remove the right center decorative panel assembly on the passenger side4. 拆卸副驾驶侧右中装饰板总成
|
|
|
1 Remove the fixing screw ①.拆卸固定螺钉①。
|
|
Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀 |
|
|
|
2 Pry out the driver's side right center decorative panel assembly A.撬出驾驶侧右中装饰板总成A。
|
|
Recommended tools: Interior parts removal tools推荐工具：内饰件拆卸工具 |
|
|
Note:提示： |
|
♦
|
Pay attention to the position of the claw at point 10 in the picture.注意图示10处卡爪位置。 |
|
|
|
Installation procedure安装程序
|
|
1. Install the right center decorative panel assembly on the passenger side1. 安装副驾驶侧右中装饰板总成
|
|
|
1 Place and adjust the center right decorative panel assembly A on the passenger side to the installation position, align the 10 claw positions shown in the figure and press firmly to ensure that it is installed in place.放置并调整副驾驶侧右中装饰板总成A到安装位置，对准图示10处卡爪位置用力按压，确保安装到位。
|
|
|
2 Install the fixing screw ① and tighten.安装固定螺钉①并紧固。
|
|
Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀 |
|
|
|
2. Install the right end cover assembly of the instrument panel2. 安装仪表板右侧端盖总成
|
|
|
3. Install the passenger side lower right decorative panel assembly3. 安装副驾驶侧右下装饰板总成
|
Passenger side right center decorative panel assembly副驾驶侧右中装饰板总成
