Rear fog light后雾灯
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
3 Lift the vehicle.举升车辆。
|
|
2. Remove the rear floor front lower guard body2. 拆卸后地板前下护板本体
|
|
3. Remove the rear floor guard body3. 拆卸后地板后下护板本体
|
|
4. Remove the rear fog lamp4. 拆卸后雾灯
|
 |
1 Disconnect connector A, remove 3 fixing screws ①, and remove the rear fog lamp.断开接插件A，拆卸3颗固定螺钉①，取下后雾灯。
|
Installation procedure安装程序
|
1. Install rear fog lights1. 安装后雾灯
|
|
|
1 Place and adjust the rear fog lamp to the installation position, install and tighten the 3 fixing screws ①, and connect connector A.放置并调整后雾灯到安装位置，安装3颗固定螺钉①并紧固，连接接插件A。
|
|
2. Install the rear floor guard body2. 安装后地板后下护板本体
|
|
3. Install the rear floor and front lower guard body3. 安装后地板前下护板本体
|
|
4. Connect the negative terminal of the 12V battery, start the vehicle, and check that the keyless entry system should work normally.4. 连接蓄电池负极，启动车辆，检查无钥匙进入系统应正常工作
|