Rear floor front lower guard body后地板前下护板本体
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，使整车电源处于“OFF”状态。
2 Lift the vehicle.举升车辆。
|
|
2. Remove the rear floor front lower guard body2. 拆卸后地板前下护板本体
|
 |
1 Remove the 9 fixing bolts ① and remove the rear floor and front lower guard body.拆卸9颗固定螺栓①，取下后地板前下护板本体。
|
Installation procedure安装程序
|
1. Install the rear floor and front lower guard body1. 安装后地板前下护板本体
|
|
|
1 Place and adjust the installed front lower floor guard body to the installation position, install 9 fixing bolts ① and tighten them.放置并调整安装后地板前下护板本体到安装位置，安装9颗固定螺栓①并紧固。
|
|
2. Land the vehicle, start the vehicle and drive off the lift, conduct road test and check2. 降落车辆，起动车辆并驶离举升机，路试检查
|