Left rear facing camera左侧后向摄像头

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the left front wheel arch assembly2. 拆卸左前轮眉总成 Reference: Left front wheel arch trim assembly参考：左前轮眉总成

3. Remove the left front wheel arch trim piece3. 拆卸左前轮眉装饰件 Reference: Left front wheel arch decorative part参考：左前轮眉装饰件

4. Remove the left rear-facing camera4. 拆卸左侧后向摄像头

1 Remove the 2 fixing screws ① and remove the left rear-facing camera.拆卸2颗固定螺钉①，取下左侧后向摄像头。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

Installation procedure安装程序

1. Install the left rear-facing camera1. 安装左侧后向摄像头

1 Place and adjust the left rear-facing camera to the installation position, install 2 fixing screws ① and tighten.放置并调整左侧后向摄像头到安装位置，安装2颗固定螺钉①并紧固。 Recommended tools: Phillips screwdriver推荐工具：十字螺丝刀

2. Install the left front wheel arch trim piece2. 安装左前轮眉装饰件 Reference: Left front wheel arch decorative part参考：左前轮眉装饰件

3. Install the left front wheel arch trim assembly3. 安装左前轮眉总成 Reference: Left front wheel arch trim assembly参考：左前轮眉总成

4. Connect the negative terminal of the 12V battery, start the vehicle, and check that the left rear-facing camera should work normally.4. 连接蓄电池负极，启动车辆，检查左侧后向摄像头应正常工作