Left front wheel arch decorative part左前轮眉装饰件
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the left front wheel arch assembly2. 拆卸左前轮眉总成
|
|
3. Remove the left front wheel arch trim piece3. 拆卸左前轮眉装饰件
|
 |
1 Remove the 3 fixing screws ① and remove the left front wheel fender decorative piece with wiring harness.拆卸3颗固定螺钉①，取下左前轮眉装饰件带线束。
|
 |
2 Disconnect connector A and remove the left front wheel fender trim assembly.断开接插件A，取下左前轮眉装饰件总成。
3 Remove the left rear-facing camera拆卸左侧后向摄像头
|
Installation procedure安装程序
|
1. Install the left front wheel arch trim piece1. 安装左前轮眉装饰件
1 Install left rear-facing camera安装左侧后向摄像头
|
|
|
2 Connect connector A to the left rear-facing camera.连接接插件A到左侧后向摄像头。
|
|
|
3 Place and adjust the left front wheel arch decorative piece to the installation position, install 3 fixing screws ① and tighten.放置并调整左前轮眉装饰件到安装位置，安装3颗固定螺钉①并紧固。
|
|
2. Install the left front wheel arch trim assembly2. 安装左前轮眉总成
|
|
3. Connect the negative terminal of the 12V battery, start the vehicle, and check that all functions are working normally.3. 连接蓄电池负极，启动车辆，检查各项功能应正常使用
|