Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置,启用驻车制动,使整车电源处于“OFF”状态。
2 Lift the vehicle.举升车辆。
|
|
|
2. Remove the left front wheel assembly2. 拆卸左前车轮总成
|
|
|
3. Remove the left front wheel arch assembly3. 拆卸左前轮眉总成
|
|
|
4. Remove the left front wheel fender assembly4. 拆卸左前轮挡泥板总成
|
|
|
1 Remove the 4 fixing screws ①.拆卸4颗固定螺钉①。
|
|
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀 |
|
|
|
2 Remove the 5 fixing screws ①.拆卸5颗固定螺钉①。
|
|
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀 |
|
|
|
3 Remove the fixing screw seat ①, cotter pin ②, and fixing screw ③.拆卸固定螺钉座①、开尾销②、固定螺钉③。
|
|
Recommended tools: 10mm socket ①, snap driver ②, Phillips screwdriver ③推荐工具:10mm套筒①、卡扣起子②、十字螺丝刀③ |
|
|
|
4 Remove 3 fixing screws ① and 2 cotter pins ②, and remove the left front wheel fender assembly.拆卸3颗固定螺钉①、2颗开尾销②,取下左前轮挡泥板总成。
|
|
Recommended tools: Phillips screwdriver ①, snap driver ②推荐工具:十字螺丝刀①、卡扣起子② |
|
Installation procedure安装程序
|
|
1. Install the left front wheel fender assembly1. 安装左前轮挡泥板总成
|
|
|
1 Place and adjust the left front wheel fender assembly to the installation position, install 2 cotter pins ② and 3 fixing screws ① and tighten them.放置并调整左前轮挡泥板总成到安装位置,安装2颗开尾销②、3颗固定螺钉①并紧固。
|
|
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀 |
|
|
|
2 Install the fixing screw seat ①, cotter pin ②, and fixing screw ③.安装固定螺钉座①、开尾销②、固定螺钉③。
|
|
Recommended tools: 10mm socket ①, Phillips screwdriver ③推荐工具:10mm套筒①、十字螺丝刀③ |
|
|
|
3 Install 5 fixing screws ① and tighten.安装5颗固定螺钉①并紧固。
|
|
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀 |
|
|
|
4 Install the 4 fixing screws ① and tighten them.安装4颗固定螺钉①并紧固。
|
|
Recommended tools: Phillips screwdriver推荐工具:十字螺丝刀 |
|
|
|
2. Install the left front wheel arch trim assembly2. 安装左前轮眉总成
|
|
|
3. Install the left front wheel assembly3. 安装左前车轮总成
|
|
|
4. Land the vehicle, start the vehicle and drive away from the lift4. 降落车辆,起动车辆并驶离举升机
|