Right suspension assembly右悬置总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Drive the vehicle into the lift position, activate the parking brake, and put the vehicle power supply in the "OFF" state.将车辆驶入举升机举升位置，启用驻车制动，使整车电源处于“OFF”状态。
2 Lift the vehicle.举升车辆。
|
|
2. Remove the front compartment front lower cover panel assembly2. 拆卸机舱前下护板总成
|
|
3. Remove the right front wheel arch assembly3. 拆卸右前轮眉总成
|
|
4. Remove the right front wheel assembly4. 拆卸右前车轮总成
|
|
5. Remove the right front wheel fender assembly5. 拆卸右前轮挡泥板总成
|
|
6. Remove the right suspension assembly6. 拆卸右悬置总成
1 Use hydraulic brackets to securely support the integrated electric drive assembly.使用液压托架稳固支撑集成电力驱动总成。
|
 |
2 Remove 3 fixing bolts ①, 1 fixing nut and bolt ②, and remove the right suspension assembly.拆卸3颗固定螺栓①，1颗固定螺母及螺栓②，取下右悬置总成。
|
Installation procedure安装程序
|
1. Install the right suspension assembly1. 安装右悬置总成
|
|
|
1 Place and adjust the right suspension assembly to the installation position, install 3 fixing bolts ①, 1 fixing bolt and nut ② and tighten them.放置并调整右悬置总成到安装位置，安装3颗固定螺栓①，1颗固定螺栓及螺母②并紧固。
2 Slowly lower the hydraulic bracket and remove it.缓慢降落液压托架并移出。
|
|
2. Install the right front wheel fender assembly2. 安装右前轮挡泥板总成
|
|
3. Install the right front wheel assembly3. 安装右前车轮总成
|
|
4. Install right front wheel arch assembly4. 安装右前轮眉总成
|
|
5. Install the front compartment front lower cover panel assembly5. 安装机舱前下护板总成
|
|
6. Land the vehicle, start the vehicle and drive off the lift, conduct road test and check6. 降落车辆，起动车辆并驶离举升机，路试检查
|