Second row backrest middle mounting bracket assembly第二排靠背中间安装支架总成

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the second row seat cushion assembly2. 拆卸第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

3. Remove the second row left seat back assembly3. 拆卸第二排左座椅靠背总成 Reference: Second row left seat back assembly参考：第二排左座椅靠背总成

4. Remove the second row right seat back assembly4. 拆卸第二排右座椅靠背总成 Reference: Second row right seat back assembly参考：第二排右座椅靠背总成

5. Remove the middle mounting bracket assembly of the second row backrest5. 拆卸第二排靠背中间安装支架总成

1 Remove the 3 fixing bolts ① and remove the middle mounting bracket assembly of the second row backrest.拆卸3颗固定螺栓①，取下第二排靠背中间安装支架总成。 Recommended tools: 15mm socket推荐工具：15mm套筒

Installation procedure安装程序

1. Install the middle mounting bracket assembly of the second row backrest1. 安装第二排靠背中间安装支架总成

1 Place and adjust the middle mounting bracket assembly of the second row backrest to the installation position, install 3 fixing bolts ① and tighten them.放置并调整第二排靠背中间安装支架总成到安装位置，安装3颗固定螺栓①并紧固。 Recommended tools: 15mm socket推荐工具：15mm套筒 Torque requirement: 40-50N·m扭矩要求：40-50N•m

2. Install the second row right seat back assembly2. 安装第二排右座椅靠背总成 Reference: Second row right seat back assembly参考：第二排右座椅靠背总成

3. Install the second row left seat back assembly3. 安装第二排左座椅靠背总成 Reference: Second row left seat back assembly参考：第二排左座椅靠背总成

4. Install the second row seat cushion assembly4. 安装第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

5. Connect the negative terminal of the 12V battery and check that the left and right seat back assemblies of the second row can be folded normally.5. 连接蓄电池负极，检查第二排左、右座椅靠背总成应能正常折叠