Removal procedure拆卸程序
|
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and turn the vehicle power supply to "OFF".将车辆停在平坦路面，启用驻车制动，整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
|
2. Remove the hatchback door sill trim panel assembly2. 拆卸掀背门门槛饰板总成
|
|
|
3. Remove the second row seat cushion assembly3. 拆卸第二排座椅坐垫总成
|
|
|
4. Remove the left rear inner sill trim panel assembly4. 拆卸左后内门槛饰板总成
|
|
|
5. Remove the second row left seat back assembly5. 拆卸第二排左座椅靠背总成
|
|
|
6. Remove the second row left backrest connection bracket6. 拆卸第二排左靠背连接支架
|
|
|
7. Remove the trunk light7. 拆卸行李箱灯
|
|
|
8. Remove the left C-pillar lower trim panel assembly8. 拆卸左C柱下饰板总成
|
|
|
9. Remove the left C-pillar upper trim panel assembly9. 拆卸左C柱上饰板总成
|
|
|
10. Remove the second row left seat belt assembly10. 拆卸第二排左侧安全带总成
|
|
|
1 Remove the fixing bolt ①.拆卸固定螺栓①。
|
|
Recommended tools: 14mm socket推荐工具：14mm套筒 |
|
|
|
2 Disconnect the connector, remove the fixing bolts ① and ②, and take out the second row left seat belt assembly.断开接插件，拆卸固定螺栓①、②，取出第二排左侧安全带总成。
|
|
Recommended tools: 10mm socket ①, 17mm socket ②推荐工具：10mm套筒①、17mm套筒② |
|
Installation procedure安装程序
|
|
1. Install the second row left seat belt assembly1. 安装第二排左侧安全带总成
|
|
|
1 Place and adjust the left seat belt assembly of the second row to the installation position, install and tighten the fixing bolts ① and ②, and connect the connector.放置并调整第二排左侧安全带总成到安装位置，安装固定螺栓①、②并紧固，连接接插件。
|
|
Recommended tools: 10mm socket ①, 17mm socket ②推荐工具：10mm套筒①、17mm套筒② |
|
|
Torque requirements: 7-9N·m①, 50-60N·m②扭矩要求：7-9N•m①、50-60N•m② |
|
|
|
2 Install the fixing bolts ① and tighten them.安装固定螺栓①并紧固。
|
|
Recommended tools: 14mm socket推荐工具：14mm套筒 |
|
|
Torque requirement: 50-60N·m扭矩要求：50-60N•m |
|
|
|
2. Install the left C-pillar upper trim panel assembly2. 安装左C柱上饰板总成
|
|
|
3. Install the left C-pillar lower trim panel assembly3. 安装左C柱下饰板总成
|
|
|
4. Install trunk light4. 安装行李箱灯
|
|
|
5. Install the second row left backrest connection bracket5. 安装第二排左靠背连接支架
|
|
|
6. Install the second row left backrest assembly6. 安装第二排左靠背总成
|
|
|
7. Install the left rear inner sill trim panel assembly7. 安装左后内门槛饰板总成
|
|
|
8. Install the second row seat cushion assembly8. 安装第二排座椅座垫总成
|
|
|
9. Install hatchback door sill trim panel assembly9. 安装掀背门门槛饰板总成
|
|
|
10. Connect the negative terminal of the 12V battery and check that the left seat belt assembly of the second row should work normally.10. 连接蓄电池负极，检查第二排左侧安全带总成应正常工作
|
Second row left seat belt assembly第二排左侧安全带总成
