Electronic parking control unit电子驻车控制单元

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, put the vehicle in "OFF" state, and activate the parking brake.将车辆停在平坦路面，整车处于“OFF”状态，启用驻车制动。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the hatchback door sill trim panel assembly2. 拆卸掀背门门槛饰板总成 Reference: Hatchback door sill trim panel assembly参考：掀背门门槛饰板总成

3. Remove the second row seat cushion assembly3. 拆卸第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

4. Remove the left rear inner sill trim panel assembly4. 拆卸左后内门槛饰板总成 Reference: Left rear inner sill trim panel assembly参考：左后内门槛饰板总成

5. Remove the second row left seat back assembly5. 拆卸第二排左座椅靠背总成 Reference: Second row left seat back assembly参考：第二排左座椅靠背总成

6. Remove the second row left backrest connection bracket6. 拆卸第二排左靠背连接支架 Reference: Second row left backrest connection bracket参考：第二排左靠背连接支架

7. Remove the trunk light7. 拆卸行李箱灯 Reference: luggage compartment light参考：行李箱灯

8. Remove the left C-pillar lower trim panel assembly8. 拆卸左C柱下饰板总成 Reference: Left C-pillar lower trim panel assembly参考：左C柱下饰板总成

9. Remove the electronic parking control unit9. 拆卸电子驻车控制单元

1 Disconnect connector A, remove 2 fixing nuts ①, and remove the electronic parking control unit.断开接插件A、拆卸2颗固定螺母①，取下电子驻车控制单元。 Recommended tools: 10mm socket推荐工具：10mm套筒

Installation procedure安装程序

1. Install the electronic parking control unit1. 安装电子驻车控制单元

1 Place and adjust the electronic parking control unit to the installation position, install and tighten 2 fixing nuts ①, and connect connector A.放置并调整电子驻车控制单元到安装位置，安装2颗固定螺母①并紧固，连接接插件A。 Recommended tools: 10mm socket推荐工具：10mm套筒 Torque requirement: 6-10N·m扭矩要求：6-10N•m

2. Install the left C-pillar lower trim panel assembly2. 安装左C柱下饰板总成 Reference: Left C-pillar lower trim panel assembly参考：左C柱下饰板总成

3. Install trunk light3. 安装行李箱灯 Reference: luggage compartment light参考：行李箱灯

4. Install the second row left backrest connection bracket4. 安装第二排左靠背连接支架 Reference: Second row left backrest connection bracket参考：第二排左靠背连接支架

5. Install the second row left seat back assembly5. 安装第二排左座椅靠背总成 Reference: Second row left seat back assembly参考：第二排左座椅靠背总成

6. Install the left rear inner sill trim panel assembly6. 安装左后内门槛饰板总成 Reference: Left rear inner sill trim panel assembly参考：左后内门槛饰板总成

7. Install the second row seat cushion assembly7. 安装第二排座椅坐垫总成 Reference: Second row seat cushion assembly参考：第二排座椅坐垫总成

8. Install hatchback door sill trim panel assembly8. 安装掀背门门槛饰板总成 Reference: Hatchback door sill trim panel assembly参考：掀背门门槛饰板总成

9. Connect the negative terminal of the 12V battery, start the vehicle, and check that the parking brake function should be normal.9. 连接蓄电池负极，启动车辆，检查驻车制动功能应正常