Interior temperature sensor assembly车内温度传感器总成
Removal procedure拆卸程序
|
1. Preparation1. 准备工作
1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。
2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。
|
|
2. Remove the driver's side lower left decorative panel assembly2. 拆卸驾驶侧左下装饰板总成
|
|
3. Remove the driver's side lower trim panel assembly3. 拆卸驾驶侧下饰板总成
|
|
4. Remove the interior temperature sensor assembly4. 拆卸车内温度传感器总成
|
 |
1 Disconnect connector A, pull out and remove interior temperature sensor assembly B.断开接插件A，拔出并取下车内温度传感器总成B。
|
Installation procedure安装程序
|
1. Install the interior temperature sensor assembly1. 安装车内温度传感器总成
|
|
|
1 Place and adjust the interior temperature sensor assembly B to the installation position, and connect the connector A.放置并调整车内温度传感器总成B到安装位置，连接接插件A。
|
|
2. Install the driver's side lower trim panel assembly2. 安装驾驶侧下饰板总成
|
|
3. Install the driver's side lower left decorative panel assembly3. 安装驾驶侧左下装饰板总成
|
|
4. Connect the negative terminal of the 12V battery, start the vehicle, and check that the temperature sensor assembly in the vehicle should be working normally.4. 连接蓄电池负极，启动车辆，检查车内温度传感器总成应正常工作
|