Backup power socket (auxiliary instrument)后备电源插座(副仪表)

Removal procedure拆卸程序

1. Preparation1. 准备工作 1 Park the vehicle on a flat road, activate the parking brake, and put the vehicle's power supply in the "OFF" state.将车辆停在平坦路面，启用驻车制动，使整车电源处于“OFF”状态。 2 Disconnect the negative terminal of the 12V battery.断开蓄电池负极。

2. Remove the switch panel assembly2. 拆卸开关面板总成 Reference: Switch panel assembly参考：开关面板总成

3. Remove the backup power socket3. 拆卸后备电源插座

1 Pry out the backup power socket A.撬出后备电源插座A。 Recommended tools: clip remover推荐工具：卡扣起子

Installation procedure安装程序

1. Install backup power outlet1. 安装后备电源插座

1 Place and adjust backup power socket A to a fixed position and fasten it.放置并调整后备电源插座A到固定位置并扣紧。   Caution:注意： ♦  Check that the backup power socket should be securely installed.检查后备电源插座应安装牢固。

2. Install the switch panel assembly2. 安装开关面板总成 Reference: Switch panel assembly参考：开关面板总成

3. Connect the negative terminal of the 12V battery, start the vehicle, and check that the backup power socket should be working normally.3. 连接蓄电池负极，启动车辆，检查后备电源插座应正常工作